Brothers: A Tale of Two Sons Remake works best when you stop treating it like a normal one-character adventure. Almost every obstacle asks you to think in pairs: who lifts, who slips through, who holds position, and who moves first.
Small mistakes can snowball fast. If one brother is in the wrong place, a simple lever pull turns into a scramble. The fastest improvement is not sharper reflexes. It is calmer positioning, clearer roles, and a habit of reading the room before you commit.
Essential Tips
1. Give Each Brother a Job Before You Move
Most scenes become easier the moment you decide who is doing the heavy work and who is doing the route work. The bigger brother usually handles lifting, pulling, swimming support, and holding a position. The younger brother is often the one who slips through bars, reaches the far side of a gate, works a crank, or uses a smaller opening.
If you walk into every puzzle with both brothers drifting around at once, you create extra movement that the game never asked for. Stop at the edge of the problem and assign roles first. That simple pause keeps the next step obvious.
2. Stage Both Brothers Before Pulling a Lever or Trigger
Brothers loves two-step interactions. One brother holds a lever, pushes a bar, or anchors a platform while the other takes advantage of the opening. A lot of early frustration comes from activating the mechanism before the second brother is ready.
Make it a rule to position the moving brother first. Put him next to the ladder, the bridge section, the gap, the door, or the climb point. Only then return to the brother who works the switch. This keeps the action smooth and prevents the stop-start feeling that can make the controls seem clumsier than they are.
The same rule helps in scenes with winches, raised bridges, trap setups, and other short openings. Preparation matters more than speed.
3. Treat Water, Heights, and Narrow Gaps as Role Checks
The game repeatedly tests whether you remember what each brother can safely do. Water is the clearest example. When a scene involves swimming, think about the bigger brother as the mover and the younger brother as the rider who needs protection through the crossing.
Narrow bars and tight openings usually point the other way. If a route looks too small or separated by a gate, expect the younger brother to create the opening and the bigger brother to benefit after. High ledges often work through a boost, a pull-up, or a rope drop rather than a perfectly timed jump.
When the route looks awkward, do not assume you missed a hidden button. First check whether the obstacle is really asking for the other brother.
4. Use the Camera to Read Puzzle Order, Not Just Space
This remake still wants you to notice the order of actions in the environment. A crank beside a broken bridge, a rope hanging above a ledge, a lever across a barred path, or a dog pacing a field are all clues about sequence. The question is rarely “Can I do this?” The question is “What has to happen first?”
Pan the camera and study the full setup before you commit. Look for where each brother ends up after the first interaction, not just what the first interaction does. If you can see the landing spot, ladder, or gate on the far side, you can usually identify which brother needs to move first.
This also helps in areas with hidden paths or optional interactions.
5. Move One Brother at a Time in Busy Sections
When a scene becomes visually loud, simplify your inputs. Chase moments, stealth beats, collapsing paths, and enemy pressure can tempt you to move both brothers at once. That usually creates crossed paths and missed prompts.
Instead, reduce the scene to a lead and support role. Move the brother with the urgent path first, then shift attention to the one who follows or maintains the setup. In a stealth space, this might mean getting the route-safe brother into cover before pulling the second one forward. In a puzzle under pressure, it might mean holding one in a stable anchor position until the other finishes his path.
The game feels much cleaner when you think in alternating turns even though both characters are active.
6. Talk Through Co-op Like You Would a Puzzle
Local co-op removes the solo hand-split challenge, but it does not remove the need for planning.
Before a lever, bridge, ladder, or chase section, say the plan out loud. Decide who stays, who climbs, who crosses first, and when the release happens. Short calls such as “hold,” “cross now,” “I need the gate open,” or “wait for me at the crank” prevent most mistakes.
If you are using PC co-op through a couch setup or Remote Play Together, keep the same habit.
7. Expect Danger Scenes to Reuse Earlier Puzzle Logic
The bosses and chase sequences may feel dramatic, but they are still built on the same teamwork language as the quieter sections. One brother distracts while the other acts. One creates the opening while the other escapes. One anchors the sequence while the other reaches the weak point.
That means you do not need to panic when the game raises the stakes. Think back to the simpler puzzles that taught you the same rhythm: distraction, access, release, escape, regroup. If a boss looks intimidating, the answer is usually not advanced combat technique. It is clean teamwork under pressure.
This is especially useful in scenes with guards, wolves, or larger creatures. Read the encounter as a moving puzzle, not a test of raw action-game skill.
Solo and Co-op Rhythm
Solo play is really about building muscle memory for two different jobs at once. The cleanest way to do that is to keep each brother mentally attached to a role even when the scene changes. Let the bigger brother feel like your anchor for lifting, pulling, carrying, and stabilizing. Let the younger brother feel like your route-solver for squeezing through, circling around, and unlocking the other side.
Once that split feels natural, the controls stop fighting you. You start seeing each room as a miniature handoff. One brother opens the possibility. The other converts it into progress.
Co-op has the opposite problem. The controls are simpler, but overconfidence creates noise. Keep communication plain. Identify the obstacle, assign the opener, then assign the closer.
No matter which mode you use, regroup after every messy attempt. Put both brothers back into obvious positions, re-read the scene, and start the sequence again with a plan. The game is short enough that clean repetition is much better than frantic improvisation.
Handling Chases and Boss Scenes
The safest habit in high-pressure scenes is to reset your focus on spacing. Make sure both brothers are visible, identify the brother who can safely hold position, and move the exposed one first. If a scene features a creature, a guard, or a collapse, ask whether the real goal is escape, bait, or opening a path.
When the brothers become separated by a trigger, do not rush the reunion. Stay with the brother who has the immediate task, finish that job cleanly, then use the restored path to bring the pair back together.
Boss scenes also reward patience. Watch one full attack or movement pattern before committing. If an enemy is too dangerous to challenge head-on, the answer is usually hiding, knocking it off balance, luring it into position, or using the environment around it. The emotional tone can make these moments feel urgent, but the puzzle underneath is usually readable once you stop trying to brute-force it.
Common Mistakes to Avoid
-
Do not move both brothers without a plan - Most failures come from confusion about roles, not from the obstacle itself.
-
Do not pull a lever before the second brother is in place - Set the route up first, then trigger the change.
-
Do not force the wrong brother through the problem - Swimming, lifting, squeezing through bars, and working the far side all point to different jobs.
-
Do not read chase scenes like pure action sequences - They still rely on distraction, timing, and positioning.
-
Do not ignore the shape of the room - Ladders, bars, ropes, bridges, and crank placements usually reveal the order of operations.
-
Do not let co-op turn into two separate solo runs - Call out the plan before either player commits.
-
Do not restart in a rush after a failed attempt - Pause, restage both brothers, and run the sequence cleanly.
-
Do not skip optional corners too quickly - The remake includes hidden details and a few extra secrets for players who look around.
Summary
| Category | Top Tip |
|---|---|
| Puzzle Setup | Assign one brother to the anchor job and the other to the route job |
| Switches and Levers | Position the moving brother first, then trigger the mechanism |
| Traversal | Read water, bars, and ledges as clues about which brother should act |
| Camera Use | Study the full room to understand action order before moving |
| Busy Scenes | Move one brother at a time when pressure rises |
| Local Co-op | Say the plan out loud before anyone commits |
| Bosses and Chases | Treat danger like a teamwork puzzle, not a reflex test |
| Exploration | Slow down for hidden details and side interactions |
Did this answer your question?
Your feedback helps keep the useful answers visible.Sources
5 checked for this guideEvery factual claim in this guide was checked against at least two independent sources before publication. These are the references used for Brothers: A Tale of Two Sons Remake.
Next answers
Community notes0
No community notes yet.
Sign in to contribute